Asked by: Ginesta Natal
home and garden home appliances

How much does Roto Rooter charge for drain cleaning?

Last Updated: 9th July, 2021

Roto-Rooter Drain Cleaning Cost
Roto-Rooter is a national company that offers a flat rate for their drain clearing services, usually between $160 and $450. They base their pricing on the severity and location of the blockage. The price for sewer inspections is included in the clog clearing project cost.

Click to see full answer.

Also asked, how much does it cost for a plumber to snake a drain?

On average, you will pay about $109 to $214 for clogs that occur in the shower, bathtub, kitchen, or bathroom. If you are looking to remove a clog from a laundry drain, then it may cost you a bit more, about $151 to $214. For toilet clogs, it may range anywhere from $109 to $273.

One may also ask, is Roto Rooter more expensive? This is one of the reasons why a Roto Rooter service costs more than other plumbers. On the average, most homeowners pay $410 for unclogging a sewer main. Meanwhile, the average Roto Rooter prices can be anywhere between $100 and $800. For drain problems, Roto Rooter can open your drain for $350.

Moreover, how much does it cost for drain cleaning?

While price varies depending on the market and the severity of the clog, Young from Legacy Plumbing says the average cost to clear a tub, kitchen or bathroom drain runs $109 to $214. Removing a clog from a laundry drain costs between $151 to $214, and remedying a toilet clog ranges from $109 to $273.

How do you pay Roto Rooter?

Average Hourly Rate for Roto-Rooter Employees Hourly pay at Roto-Rooter ranges from an average of $11.97 to $28.40 an hour. Roto-Rooter employees with the job title Plumber make the most with an average hourly rate of $21.09, while employees with the title Plumber make the least with an average hourly rate of $21.09.

Related Question Answers

Abilio Kopp


What do plumbers use to unclog drains?

An auger — also known as a plumbing snake — or flat sewer rod can clear blockages deep in drain lines. Chemical drain cleaners contain a high concentration of lye, bleach or sulfuric acid to soften and break up clogs.

Meijuan Brangs


Can I snake my own drain?

The most important tool you'll need for snaking your own drain is a hand auger. But, it's important to keep the original hook-shape on the end - it'll be good for catching any debris, deep down in the drain. You might want to make the hook a bit narrower though, so it can fit down the pipe, properly.

Eyal Irigaray


How do you unclog a drain full of hair?

Unclogging a hair-clogged drain using baking soda will require baking soda, white vinegar, and hot water.
  1. Measure one cup of baking soda and pour it down the drain.
  2. Watch for a fizzing in the drain and five minutes after the fizzing stops, flush the drain with two quarts of hot water.

Tabata Melet


How do you snake a drain?

The basic process is as follows:
  1. Push the end of the snake into the drain opening and turn the handle on the drum that contains the coiled-up snake.
  2. Keep pushing more of the snake into the drain until you feel resistance.
  3. Rotate the snake against the blockage until you feel it feed freely into the pipe.

Bouzid Caragea


How do you unclog a main sewer line without a snake?

How To Unclog Main Sewer Line Without A Snake
  1. Step 1 – Run Hot Water. If you run hot water straight from the tap, it may help unclog the drains or pipes that are partially clogged.
  2. Step 2 – Apply Chemical Drain Cleaner. You can find a chemical drain cleaner in almost every hardware or department store.
  3. Step 3 – Get A Force-Ball Plunger.

Lacey Curwood


How can I unclog my bathroom sink?

5 Natural Ways to Unclog a Bathroom Sink
  1. Baking Soda and Vinegar. This is an old method of unclogging drains that has proven to be very effective in bathroom sinks.
  2. Baking Soda and Salt. Another effective combination is baking soda and salt.
  3. Boiling Water.
  4. Wet and Dry Vacuum.
  5. Wire Hanger.

Eihar Juerries


How much is a Plumbers hourly rate?

Plumbing Estimates
The cost of a plumber ranges from $175 to $450 for a typical job with the average cost per hour ranging from $45 to $200. This can include jobs like repairing faucets, toilets, sinks or bathtubs. Depending on the job, some plumbers charge a flat rate, or service fee of $300 on average.

Geneva Gottschalt


Is Hydro Jetting safe for pipes?

Hydro jetting is known as one of the most safe, thorough, and effective ways to clean out stubborn pipe blockages. This method uses a hose to blast continuous high pressure water through your pipes to clear blockages, cleaning the entire diameter of the pipe.

Sulema Charuhin


Do it yourself drain cleaning?

Mix 1/2 cup baking soda with 1/4 cup table salt and pour down the drain giving you trouble. Follow by pouring 1 cup of heated vinegar down the drain (it will foam and bubble). Cover the drain with a plug or duct tape to prevent the mixture from escaping. Let it sit for 15 minutes.

Geza Santiesteban


How often should drains be cleaned?

Professionals recommended that in any house, it is a good idea to get your drains tested and cleaned once every two years. But if you notice a problem, for example, water drains slowly, or there is a smell coming from your drain, you have a clog that should be dealt with sooner rather than later.

Xiaokang Bahtoff


How do you know if your main line is clogged?

Main sewer line clogs usually cause water to back up out of a drain or plumbing system. These clogs can cause a gurgling sound to come from your drains. Possible signs include your toilet water bubbling, water backing up from your tub or shower when you flush, or water bubbling from your faucets.

Celestin Argentino


Is Hydro Jetting worth it?

This is especially good because it will take care of any blockage you have: sediment, grease, hair, mineral build-up, tree roots, and debris. The beauty of hydro jetting is that it can clear almost any clog! However, it should be done by a professional plumber so that you're less likely to get damage to your plumbing.



How do I find the main drain in my house?

If you do have a buried cleanout, it's usually easy to find. To find it, walk around the perimeter of your house, close to the foundation. A buried sewer cleanout is generally located on the outside of a bathroom, you'll recognize it as a three- to four-inch capped pipe.

Misti Llasera


Why is my basement drain backing up?

When water is backing up out of your floor drain, the causes are many. It typically means the house drain under your basement floor is full of water. That can mean a rainstorm has surcharged the drain system, or even the public sewer system. A main line clog can be in the house drain, house trap, or house sewer.

Aimane Cadar


How much will a plumber charge to unclog a toilet?

The national average to have a clogged toilet cleared by a plumber is about $160.00 for a basic job without complications. If the clog is deeper in your sewer line and requires special equipment or more labor their charges will be more. The cost will also be more on holidays and weekends or emergencies.

Christof Haveneth


How much should it cost to install a toilet?

A standard toilet install should take between one and two hours to complete and cost an average of $348 or less. Basic installs will run around $115. Unexpected costs could raise the cost up to as much as $800.

Hebe Ines


Can Roto Rooter damage pipes?

If the wrong pipes, joints or connectors are used, leaks may occur or or pipes can break. Not calling a professional. Roto-Rooter's professional plumbers deliver fast, dependable service around-the-clock and can often save you from a serious plumbing mistake.

Neuza Kabbouri


Is Roto Rooter cheaper than a plumber?

Roto-Rooter plumbers can get to a location on the same day, typically in less than two hours. As opposed to hourly pricing that can lead to high labor costs, Roto-Rooter charges a flat rate fee for their services. This means that you don't have to worry about the length of a job or the working pace of the plumber.